DCS Twin Screw Pump, Inoxpa

Valves

30 Products

Tubes & Fittings

3 Products

Pumps

23 Products

Mixings

3 Products

Instruments

10 Products

Hoses

9 Products

Fittings & Others

9 Products
BƠM TRỤC VÍT ĐÔI DCS TWIN SCREW PUMP

DCS Twin Screw Pump, Inoxpa

he DCS is a twin screw pump, with sanitary design, suitable for use in the dairy, food and beverage, cosmetics, etc. The flow is uniform and in an axial direction, so there are no changes of volume or physical properties of the product. Therefore it is an ideal pump for handling shear-sensitive fluids.

Contact:

Product detail

– The DCS is a twin screw pump, with sanitary design, suitable for use in the dairy, food and beverage, cosmetics, etc.
– The flow is uniform and in an axial direction, so there are no changes of volume or physical properties of the product. Therefore it is an ideal pump for handling shear-sensitive fluids.
– It has a high suction lift capability with very low NPSH values.
– It is capable of pumping liquids with high viscosity, but also with low viscosity, so it can be used as a CIP-supply pump.
– The design ensures a fully cleanability and drainability.

Design and features

The DCS pumps are available in two versions: close coupled and bare shaft construction. They have a two part design (pumpcasing and separate flange). The mechanical seals have a sanitary design. When required, other materials can be used.

Motor
Triphasic induction motor with B5 flange and B3 legs for monoblock version.
Triphasic induction motor with B3 legs for bare shaft version.
In both versions the motor complies with the IEC standards, efficiency class according to EC regulation, IP 55 protection and F-class insulation.
3 phases, 50 Hz, 230 V Δ / 400 V Y, ≤ 4 kW
3 phases, 50 Hz, 400 V Δ / 690 V Y, ≤ 5,5 kW

Materials

Parts in contact with the product 1.4404 (AISI 316L)
Bearing support 1.4401 (AISI 316)
Gear housing aluminium
Gaskets in contact with the product EPDM

Mechanical seal
Rotary part silicon carbide (SiC)
Stationary part silicon carbide (SiC)
Gasket EPDM

Surface finish
Internal Ra ≤ 0,8 μm
External Matt

Options

Mechanical seals: TuC/TuC
Knife-edge single mechanical seals
Double mechanical seals
Gaskets: FPM, HNBR, FFKM
Heating chamber
Bareshaft version
Connections: Clamp, SMS, Flanges
ATEX Certification

Downloads

KHANH ANH COMPANY LIMITED
Address: F10, street 6, Van Gia Phuc block, 295 Tan Ky Tan Quy str., Tan Son Nhi ward, Tan Phu dist., Ho Chi Minh city, Vietnam.
Email: kaco@inoxkaco.vn
Hotline: +84 28 6658 2434 – 6659 2434

Scroll to Top