BFI Vertical Agitator – INOXPA

Valves

36 Products

Tubes & Fittings

3 Products

Pumps

25 Products

Mixings

13 Products

Instruments

12 Products

Hoses

10 Products

Fittings & Others

10 Products

BFI Vertical Agitator – INOXPA

Danh mục: Agitators, Mixings
These agitators are used in processes of mixing, dissolution, dispersion and maintenance whenever powerful and high-speed agitation is required in the food processing, cosmetics, pharmaceutical or chemical industries.

Contact:

Product detail

The range of BFI series presents vertical direct motor-driven agitators.

These agitators are used in processes of mixing, dissolution, dispersion and maintenance whenever powerful and high-speed agitation is required in the food processing, cosmetics, pharmaceutical or chemical industries.

The agitators are normally fitted to small or medium volume tanks for work with low-viscosity products.

Bearing support of the BFI series agitators is manufactured in stainless steel and it is indicated for the pharmaceutical applications.

The agitators are normally installed inside the tank either centrally with current deflectors, or offset so that the offsetting itself prevents the rotation of the stirred product.

The rotation of the propeller makes the fluid flow to the bottom and then up to the surface of the product along the walls of the tank. The effect is promoted if the bottom of the tank is curved.

The saw tooth propeller promotes the dispersion of the product.

Vertical agitator.
Double lip seal.
Double ball bearing support.
The propeller fixed to the shaft by means of a threaded connection and a gasket; the shaft is made of one piece.
IEC motors, 1500 rpm, IP 55, F-class insulation.
Marine propeller (Type 10) or saw tooth propeller (Type 4).
Indicated for work under pressure or in vacuum (-1 to 4 bar).

Parts in contact with the product 1.4404 (AISI 316L)
Retainer GYLON according to FDA 177.1550
Bearing support 1.4301 (AISI 304)
Surface finish Ra ≤ 0,8 μm (except cowler)

Different sealing options.
Shaft and propeller lined with plastic material for use with corrosive products.
Welded propeller with Ra ≤ 0,4 μm surface finish.
Motor shroud.
Motors with other protections.
Motors: 950 rpm or 750 rpm.
Geared motors or variable speed drives.

Downloads

KHANH ANH COMPANY LIMITED
Address: F10, street 6, Van Gia Phuc block, 295 Tan Ky Tan Quy str., Tan Son Nhi ward, Tan Phu dist., Ho Chi Minh city, Vietnam.
Email: kaco@inoxkaco.vn
Hotline: +84 28 6658 2434 – 6659 2434

Scroll to Top