ME-6100 RE Recirculation Tank Bottom Mixer – INOXPA

Valves

36 Products

Tubes & Fittings

3 Products

Pumps

25 Products

Mixings

13 Products

Instruments

11 Products

Hoses

10 Products

Fittings & Others

10 Products

ME-6100 RE Recirculation Tank Bottom Mixer – INOXPA

Danh mục: Mixers, Mixings
The range of high shear ME-6100 RE recirculation tank bottom mixers is a highly hygienic solution for the processes of dispersion, emulsion, homogenisation and disintegration of solids for a large number of products in the food, cosmetic, pharmaceutical and fine chemicals industries.

Contact:

Product detail

The range of high shear ME-6100 RE recirculation tank bottom mixers is a highly hygienic solution for the processes of dispersion, emulsion, homogenisation and disintegration of solids for a large number of products in the food, cosmetic, pharmaceutical and fine chemicals industries.

This head of the recirculation mixer is designed to recirculate all the product in order to achieve better product homogenisation throughout the tank, meaning the mixing is not limited to the bottom of the tank. They can be used in open or closed tanks, at atmospheric pressure or under pressure/vacuum. Recirculation tank bottom mixers are particularly indicated for operating with anchor type agitators or a counter-rotating agitators.

The ME-6100 RE recirculation tank bottom mixer range can pump the product, recirculating it inside the tank, or rather using the mixer to empty or transfer the product.

This model of mixers uses a specifically designed head, as they have a closer-fitting rotor-stator unit, where the product passes through the unit and it gets fully flooded. The rotor’s high speed combined with the adjusted tolerance between the rotor and the stator causes a powerful suction effect on the product, which pushes it to the periphery of the head where it can be pumped outwards.

The design of the mixer is fully drainable via the eccentric port connection.

  • High shear, particle size reduction to less than 100 microns.
  • Access to the mechanical seal from the inside of the tank.
  • Single sanitary mechanical seal.
  • Possibility to replace the stator without disassembling the mixer.
  • Different models of stators are easily interchangeable.
  • Motors: IEC B5, IP 55, F-class insulation.
  • Easy cleaning and sterilisation (CIP/SIP).
  • Slotted head.

Parts in contact with the product 1.4404 (AISI 316L)
Other steel parts 1.4301 (AISI 304)

Gaskets in contact with the product EPDM
Mechanical seal C/SiC/EPDM

Surface finish
Internal Ra ≤ 0,8 μm

Downloads

KHANH ANH COMPANY LIMITED
Address: F10, street 6, Van Gia Phuc block, 295 Tan Ky Tan Quy str., Tan Son Nhi ward, Tan Phu dist., Ho Chi Minh city, Vietnam.
Email: kaco@inoxkaco.vn
Hotline: +84 28 6658 2434 – 6659 2434

Scroll to Top