BCI Vertical Agitator – INOXPA

Valves

36 Products

Tubes & Fittings

3 Products

Pumps

25 Products

Mixings

13 Products

Instruments

12 Products

Hoses

10 Products

Fittings & Others

10 Products

BCI Vertical Agitator – INOXPA

Danh mục: Agitators, Mixings
The range of the BCI agitators presents vertical direct motor-driven agitators. These agitators are used in the processes of mixing, dissolution, dispersion and maintenance whenever powerful and high-speed agitation is required in the food processing, cosmetics, pharmaceutical or chemical industries.

Contact:

Product detail

The range of the BCI agitators presents vertical direct motor-driven agitators. These agitators are used in the processes of mixing, dissolution, dispersion and maintenance whenever powerful and high-speed agitation is required in the food processing, cosmetics, pharmaceutical or chemical industries.

The agitators are normally fitted to small volume tanks of up to 1.500 liters for work with low-viscosity products.

The agitators are normally installed inside the tank either centrally with current deflectors, or offset, so that the offsetting itself prevents the rotation of the stirred product.

The rotation of the propeller makes the fluid flow to the bottom and then up to the surface of the product along the walls of the tank. The effect is promoted if the bottom of the tank is curved.

The Lineflux vigorously agitates the content of the tank promoting the mixing of the product  while the saw tooth propeller promotes its dispersion.

Vertical agitator.
Sealing: V-ring and retainer.
Bearing support.
Propeller attached to shaft and shaft attached to the half-shaft by Allen studbolts.
IEC B14 motor, 1500 rpm, IP 55, F-class insulation.
Max. power 0.75 kW.
Lineflux propeller (Type 18).

Parts in contact with the product: AISI 316L
V-ring and retainer: NBR
Bearing support: Aluminum
Surface finish  Ra ≤ 0,8 μm (except Lineflux propeller)

V-ring and retainer: FPM.
Saw tooth propeller. Welded propeller with Ra ≤ 0,5 µm surface finish.
Motor shroud.
Motors with other protections.
Motors: 950 rpm or 750 rpm.
Pneumatic drive.

Downloads

KHANH ANH COMPANY LIMITED
Address: F10, street 6, Van Gia Phuc block, 295 Tan Ky Tan Quy str., Tan Son Nhi ward, Tan Phu dist., Ho Chi Minh city, Vietnam.
Email: kaco@inoxkaco.vn
Hotline: +84 28 6658 2434 – 6659 2434

Scroll to Top