SilPig Product Recovery System, Inoxpa

Valves

36 Products

Tubes & Fittings

3 Products

Pumps

23 Products

Mixings

3 Products

Instruments

10 Products

Hoses

10 Products

Fittings & Others

10 Products

SilPig Product Recovery System, Inoxpa

The PIG system is ideal for the recovery of any product remaining in a pipeline at the end of the transfer process. As this product can be of a high value the PIG system recovers the product removing it from the pipelines and preparing the pipeline for a CIP process. Another benefit is the reduction of the fluid sent to the sewage treatment plant that results in saving energy and water.

Contact:

Product detail

The PIG system is ideal for the recovery of any product remaining in a pipeline at the end of the transfer process. As this product can be of a high value the PIG system recovers the product removing it from the pipelines and preparing the pipeline for a CIP process. Another benefit is the reduction of the fluid sent to the sewage treatment plant that results in saving energy and water.

The main application of the system is viscous media. Among the products treated there are chocolates, marmelades, confectionary creams in the food-processing industry, or gels, creames and other body care products of high value in the cosmetic industry.

The system comprises a launcher, a receiver, a PIG (or a sphere), two position detectors (one for the lancher and the other for the receiver), four automatic butterfly valves and 2 KH multi-way valves.

The basic principle is that the sphere is put to the launch position Then the sphere is driven by a propellant (normally compressed air) down the pipeline to the receiver thus recovering any product left in the pipeline. When recovery is complete, the PIG is situated at the receiver and the system can be cleaned, the PIG can also be cleaned durig the normal CIP routine. Upon completion of the CIP process the sphere is located in the launcher leaving the plant ready for the next production run.

Standard system: SIL PIG.
Hygienic system.
High level of product recovery.
PIG can pass through 1.5D bends.
Connections: DIN (standard).
Size ranges: DN40 (1 ½”) to DN80 (3″).

Metallic product contact surfaces: AISI 316 L
Other metal parts: AISI 304
PIG: Silicone
Gaskets: EPDM

Connections: RJT, SMS, clamp, flanges, etc.
Spheres: EPDM, Nitrile, Neoprene and Viton®.
Gaskets: Silicone, NBR, PTFE, Viton®.
STERIPIG system.
Manual system (launch and/or reception)
Various levels of automation.
Control panel.
Second drain port.

Download

KHANH ANH COMPANY LIMITED
Address: F10, street 6, Van Gia Phuc block, 295 Tan Ky Tan Quy str., Tan Son Nhi ward, Tan Phu dist., Ho Chi Minh city, Vietnam.
Email: kaco@inoxkaco.vn
Hotline: +84 28 6658 2434 – 6659 2434

Scroll to Top