C-Top B Control unit, INOXPA
The C-TOP B control unit can adapt to any INOXPA actuator and both efficiently and individually automate pneumatically driven process valves.
Contact:
Product detail
The C-TOP B control unit can adapt to any INOXPA actuator and both efficiently and individually automate pneumatically driven process valves.
These include butterfly, ball or single or double seat valves with single-acting actuator.
Operating principle
The control head works with or without a solenoid valve. It contains two magnetic targets fixed to the adapter shaft and an electronic module formed by three sensors connected to the three visual indicators (LEDs).
Through external signals, the solenoid valve which controls and acts on the valve is activated.
At the same time, the electronic module sensors can read the position of the valve actuator through the detection of the position of the targets located on the adapter shaft and they inform of the valve state with the illuminate of the control head.
The control head includes DIP switches that allow obtaining different configurations of the output signals to adapt the control head to the different types of valves.
Design and features
– The C-TOP B installs easily onto the top of the valve’s actuator.
– Quick and simple configuration.
– Line detection using magnetic Reed type sensors.
– 360º vies of lights indicating valve status.
Materials
– Plastic parts PA6
– Nuts and bolts A2
– Gaskets NBR
– Pneumatical connections nickel-plated brass.
